-The Ultimate One-Hand Clamp with Variable Pressure. Use for light pressure or up to 1,000 lbs. of pressure. Glue resistant, non-marring plastic caps; large diameter pad surface; oversized Acme thread; large wood handle; profiled, cold drawn steel rail e
The Bessey D-BKAH is a folding utility knife. The Bessey D-BKAH Folding Utility Knife has unlimited uses and is extremely easy and convenient to use.
More info: Bessey D-BKAH Quick-Change Folding Utility Knife with Aluminum Handle
Bench Dog 40-028 Power-Loc is an auxiliary power switch that can be mounted almost anywhere. Its aluminum housing has six t-slots, and comes with an angle bracket for universal mounting. The lighted switch warns you when the power is on, crucial when using routers and other power tools that already come with their own power switch. Power-Loc also comes with a safety lock to help prevent accidental tripping. 15 amp, 120 volt, 8′ cord. Nonmagnetic.
More info: Bench Dog 40-028 Power-Loc Auxiliary Safety Power Switch
The DeWalt DW9152 is a 6-1/2 inch 36 Teeth Aluminum Cutting Circular Saw Blade. It is an ultra-thin kerf blade for fast cutting. The non-ferrous blade is for use with 6-1/2 inch saws.
More info: DeWalt DW9152 6-1/2 inch 36 Teeth Aluminum Cutting Circular Saw Blade
The Astro Pneumatic HVLPDX9 is a Gravity Feed Spray Gun. The spray gun works with fast working speed & wide fan pattern. It has an anodized gun body. The gravity feed spray gun has a 0.6 L aluminum cup, a stainless steel needle & a fluid tip which makes it suitable for water base. It includes diaphragm regulator for precise inlet pressure adjustment. An environmentally favorable HVLP system with low air consumption and high transfer efficiency exceeds 65%.
More info: Astro Pneumatic HVLPDX9 1.9 mm HVLP Gravity Feed Spray Gun, 10 CFM
The Bosch TS1002 rear outfeed support extension increases the working depth upto 39-1/2 inch, when used with the Bosch 4000 10 inch worksite table saw. The extension is constructed from hard metal with aluminum mounts.
More info: Bosch TS1002 Rear Outfeed Support Extension for Table saw Model 4000
The CST/Berger 60-RT20WDF is a Composite/Wood Heavy Duty Robotics Tripod. This heavy-duty highest grade hardwood dowels to ensure highest level of performance and stability. Composite center strut repels moisture, eliminating expansion and contracting. This tripod has removable support chains. It has heavy-duty thick wall extended aluminum clamps with better grip quick clamps for more stability and quick set-up.
More info: CST/Berger 60-RT20WDF Composite/Wood Heavy Duty Robotics Tripod
The DeWalt DW3705-5 is a pack of 5 4" 8 TPI U-Shank Aluminum/Fiberglass Cobalt Steel Jig Saw Blades. The blades have reinforced teeth design which protects the teeth from damage and stays sharper longer. The side chip path helps to quickly remove debris and clear the channel for cleaner and smoother cuts. The cobalt steel (bi-metal) lasts up to 5X longer than standard blades.
More info: DeWalt DW3705-5 4″ 8 TPI U-Shank Cobalt Steel Jig Saw Blade - 5 Pack
The Big Horn 11436 is a 4″ Aluminum Blast Gate. This blast gate is used in dust-collection systems to control airflow from one machine to another, maximizing system efficiency. Blast gate is normally closed allowing maximum suction to be delivered to the tool in use. This is a 6-1/4 x 5 gate with a 4 OD. opening on both ends to connect 4 dust hose. It makes easy to switch machines with out having to disconnect and reconnect the dust system.
More info: Big Horn 11436 4″ Aluminum Blast Gate
The Bosch 1194AVS 1/2 inch VSR hammer drill has a powerful 8.0 Amps reversing motor and an ergonomic design engineered for the most demanding applications. The dual-torque gearbox gives full-torque output in the low setting (0 to 1000 RPM / 0 to 16000 BPM) and high setting (0 to 2600 RPM / 0 to 41600 BPM). The selector lever can be used to choose the hammerdrill or drill only for steel, wood or aluminum. The kit includes 360 handle and depth gauge.
1.0 HP (Max. Tool Output) 5.7 Amp Motor -35,000 RPMFast & Precise Depth Adjustment System: Allows both macro and micro adjustmentRugged Aluminum Fixed Base: Durable, solid and preciseEnhanced Bit Capacity: Fixed Base accepts bits up to 1-5/16″ in diameterUnique Finger Support Pockets: For additional stability, especially when trimming edgesConstant ResponseTM Circuitry: Monitors and maintains speed under load for consistent performance and provides overload protectionSoftstart: Reduces start-up torqueQuick-clamp System Allows motor to be easily adjusted or moved from base to baseConvenient Front Spindle Lock on Motor: For easy, one-wrench bit changes Palm-grip design: The most comfortable router in its classAngled cord exit: Helps keep cord out of the way
More info: Bosch PR10E Factory Reconditioned Colt Single Speed Fixed Base Palm Router, 35000 RPM, 5.7 Amps
-Rugged nibbling head and .177 diameter punch cuts steel up to .60(16 Gauge) and aluminum up to .102(10 Gauge)-Easy access to punch and die for quick replacement-Four optional cutting positions-Perfect for accurate cutting of steel and aluminum, ideal for
More info: Chicago Pneumatic CP835 Heavy-Duty Nibblers, 2750 SPM, 17 CFM
-The Ultimate One-Hand Clamp with Variable Pressure. Use for light pressure or up to 1,000 lbs. of pressure. Glue resistant, non-marring plastic caps; large diameter pad surface; oversized Acme thread; large wood handle; profiled, cold drawn steel rail e
Aluminum housing for job site durabilityLong reach handle for improved comfort and controlRubber bumpers help protect floor from damage
More info: Bostitch MFN200 Factory Reconditioned 2″ Cleat Manual Flooring Cleat Nailer
The DeWalt DW3970 is a 12″ High Tension Hack Saw Frame. With aluminum and steel components, it is built to withstand the use and abuse found on the job-site. It also features hacksaw blade storage, a quick change blade changing mechanism, a robust tension adjust knob, comfortable soft-feel grips, 45 and 90 cutting for flush cutting capability, jab saw capability and a removable hand guard. The hand guard protects the user from cuts and scrapes often incurred upon material breakthrough.
The DeWalt DW367 is a Factory Reconditioned 7-1/4 inch Heavy-Duty Circular Saw with Aluminum Shoe. It has 5/8 inch arbor with 50 bevel. It includes carbide blade & wrench.
More info: DeWalt DW367 Factory Reconditioned 7-1/4 inch Heavy-Duty Circular Saw, 55000 RPM
The Bosch 1194AVSRK 1/2 inch VSR hammer drill has a powerful 8.0 Amp reversing motor and an ergonomic design engineered for the most demanding applications. Its dual-torque gearbox gives full-torque output in the low setting (0 to 1000 RPM / 0 to 16000 BPM) and high setting (0 to 2600 RPM / 0 to 41600 BPM). Use the selector lever to choose the hammerdrill or drill only for steel, wood or aluminum. The kit includes 360 handle, depth gauge and carrying case.
The DeWalt D51822 is a Factory Reconditioned Heavy-Duty 31 Clipped Head Framing Nailer. It has 7.5 lbs magnesium housing and aluminum magazine which result in one of the lightest nailers in the industry. Its 12-3/4 inch height allows for toe-nailing in confined areas. The unique engine design generates power to bury nails in both standard framing lumber and engineered lumber with minimal recoil. Dry fire lockout extends bumper life by preventing tool from actuating when magazine is empty. The impact resistant exhaust deflector protects tool from damage to the cap.
More info: DeWalt D51822 Factory Reconditioned Heavy-Duty 31° Clipped Head Framing Nailer
The Bostitch N80CB-2 is an Industrial Coil Framing Nailer. It has a coil magazine which holds up to 300 nails for high production applications. It has aluminum housing and rubber grip for comfort. The aggressive toe-nailing teeth grip lumber is for slip-free nailing and has an adjustable deflector which conveniently directs exhaust.
More info: Bostitch N80CB-2 1-1/2″ - 3-1/4″ Industrial Coil Framing Nailer
The DeWalt DW060K is a Floor Layout Laser. It is designed to provide users with an accurate and durable laser that helps save time and increase productivity. The laser offers +/- 1/8 inch per 25′ with a visible beam up to 100′ when using the target card. The 90 intersection saves time and makes it easier for layout applications. The rugged, robust aluminum housing is stable and has a built-in protractor for layout at precise angles (0, 22.5, 45, 67.5 and 90). The tile laser is ideal for professional tile installers, carpet and hardwood flooring installers and remodelers for tile layout, alignment checks and for leveling partitions and walls.
More info: DeWalt DW060K Floor Layout Laser
|
More:           Search ToolsAdvice.com: |
Translate Page:
More DIY Tools Info:
DIY Tools Categories:
    
|
