Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints.Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Straight magazine, accepts 18 gauge nails ranging in legths from 5/8″ to 2″Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches.Part of the XRP DEWALT Cordless systemContact Trip Lock-Off disables the trigger when not in use and is easy to engage/dis-engageIntegrated LED lights for long life and durabilityTop cap is impact resistant and easy to remove for troubleshooting Provides increased portability and versatility on the Job-site.Increased visibility and durability along with protection for work-surface from the contact-trip.12 position dial allows the user to move between applications without having to re-acquire exact depth settingFully enclosed, box style magazine, keep dust and debris out of the magazine preventing the tool from malfunctioning
Click here to buy
More info: DeWalt DC608K Factory Reconditioned 18-Volt XRP Cordless 18-Gauge Brad Nailer
The Bostitch SB-1850BN is a Factory Reconditioned Industrial 2″, 18 Gauge Brad Nailer Kit. It has adjustable depth control for quick countersinking adjustments. The tool-free adjustable deflector conveniently directs exhaust. It has a no-mar tip that protects work surface.
Click here to buy
More info: Bostitch SB-1850BN Factory Reconditioned Industrial 2″ Brad Nailer Kit, 18 Gauge
The Bostitch CPACK200 is a Factory Reconditioned Finish Nailer / Compressor Combo Kit. The kit includes 1.5 HP 6 gallon oil-free air compressor, SB-1664FN1 1/4″-2-1/2″ finish nailer kit and 25′ airline kit with all required fittings. The tool free depth control on the SB1664 allows for quick counter sinking adjustments without the aid of any tools. Its 360 directional exhaust prevents blowing dirt or debris on finished surface. No mar tip prevents damage to the work surface. The CAP1560 oil-less contractor compressor included with the CPACK 200 has a 1.5 HP motor, 5.8 gallon tank capacity. The compressor has an output of 3.4 cu-ft per minute at 40 PSI and 2.7 cu-ft per minute at 90 PSI. The compressor can be used to run other pneumatic tools such as a framing nailer or brad nailer. Its wheels on this unit assist in the portability around the work area.
Click here to buy
More info: Bostitch CPACK200 Factory Reconditioned 2-1/2″ Finish Nailer / Compressor Combo Kit, 16 Gauge
The DeWalt D51236K is a Heavy-Duty 1-1/4″ 18 Gauge Brad Nailer Kit. The nailer features tool-free thumb wheel depth setting for quick and easy depth adjustments. Side low nail indicator window allows the user to quickly and easily see when it is time to reload. It has tool-free jam clearing which eliminates down-time from bent nails caught in the nosepiece. Trigger lock-off allows trigger to be disabled when not in use.
Click here to buy
More info: DeWalt D51236K Heavy-Duty 1-1/4″ 18 Gauge Brad Nailer Kit, 70 - 120 PSI, 110 nails
The DeWalt D51238K is a Factory Reconditioned Heavy-Duty 18 gauge 2 inch Brad Nailer Kit. The DeWalt’s D51238 heavy-duty 18 gauge pneumatic brad nailer is built to last with many innovative features that save time and money on the job site. The 18-gauge tool holds 110 nails from 5/8 inch to 2 inch long and has enough power for even the hardest woods. In softer materials users can quickly adjust the nail depth and lock it in with an innovative vertical slide that has four indexed positions. It has a durable tool-free, front latch, jam-clearing mechanism that will not wear out over the life of the nailer. Air exhaust is channeled away from the user with a tool-free 360 adjustable exhaust setting.
Click here to buy
More info: DeWalt D51238K Factory Reconditioned Heavy-Duty 18 Gauge 2 inch Brad Nailer Kit, 70-120 PSI, 110 Nails
The DeWalt D51236K is a Factory Reconditioned Heavy-Duty 1-1/4 inch 18 Gauge Brad Nailer Kit. It features a tool-free thumb wheel depth setting for quick and easy depth adjustments. The over molded no-mar pad allows greater visibility and durability. The has a tool-free jam clearing system which eliminates down-time from bent nails caught in the nose piece. The trigger lock-off allows trigger to be disabled when not in use.
Click here to buy
More info: DeWalt D51236K Factory Reconditioned Heavy-Duty 1-1/4 inch 18 Gauge Brad Nailer Kit
The Bostitch BT200K-2 is a Factory Reconditioned 18 Gauge 5/8″ to 2″ Oil-Free Brad Nailer Kit. This lightweight tool has magnesium housing for jobsite durability. The oil-free operation prevents stains on work piece. It has ultra-quiet rear exhaust and open nose design for easy jam clearing.
Click here to buy
More info: Bostitch BT200K-2 Factory Reconditioned 5/8″ to 2″ Oil-Free Brad Nailer Kit, 18 Gauge
CAP60P-OF Compressor High efficiency motor 2HP (peak) 1.5 running 6 gallon tank capacity No maintenance oil-free pump 3.4 CFM @ 40 PSI and 2.1 CFM @ 90 PSI 135 PSI maximum 1 year limited warranty SB-1664FN Finish Nailer Drives 16GA straight finish nails from 1″ to 2-1/2″ Lightweight aluminum design for added durability Tool-free adjustable exhaust conveniently directs exhaust away from the user No-mar tip protects work surface Adjustable depth guide sets nails to desired depths quickly & conveniently Quick release nose for fast jam clearning 1 year limited warranty SB-125BN Brad Nailer Drives 18GA brad nails from 5/8″ to 1-1/4″ Lightweight aluminum design for added durability Adjustable depth guide sets nails to desired depths quickly and conveniently Tool-free adjustable exhaust conveniently directs exhaust away from the user No-mar tip protects work surface 1 year limited warranty SB-100SX Narrow Crown Stapler Lightweight aluminum design for added durability Drives 18GA 7/32″ crown SX staples from 1/2″ to 1″ Tool-free adjustable exhaust conveniently directs exhaust away from the user No-mar tip protects work surface 1 year limited warranty
Click here to buy
More info: Bostitch CPACK3 Factory Reconditioned Nailer, Stapler, and Compressor Combo Kit
The DeWalt D51238K is a Heavy-duty 18 gauge 2″ Brad Nailer Kit. The DeWalt’s D51238 heavy-duty 18 gauge pneumatic brad nailer is built to last with many innovative features that save time and money on the job site. The 18-gauge tool holds 110 nails from 5/8″ to 2″ long and has enough power for even the hardest woods. In softer materials users can quickly adjust the nail depth and lock it in with an innovative vertical slide that has four indexed positions. It has a durable tool-free, front latch, jam-clearing mechanism that will not wear out over the life of the nailer. Air exhaust is channeled away from the user with a tool-free 360 adjustable exhaust setting.
Click here to buy
More info: DeWalt D51238K Heavy-Duty 18 Gauge 2″ Brad Nailer Kit, 70-120 PSI, 110 Nails
The DeWalt D55151BN is a Factory Reconditioned Heavy-Duty 2 inch Brad Nailer/Compressor Combo Kit. The compressor has 3.4 SCFM delivered @90 PSI pump which enables quick recovery. It has 4 gallon twin stack tank design with proven acceptance in the market. The nailer is lightweight design for improving portability. It has tool-free indexed depth setting is lockable and repeatable. The side low nail indicator allows the user to quickly and easily see when it is time to reload. Nailer features overmolded no-mar pad which allows greater visibility and durability. It has tool-free jam clearing for eliminating down-time from bent nails caught in the nosepiece.
Click here to buy
More info: DeWalt D55151BN Factory Reconditioned Heavy-Duty 2 inch Brad Nailer/Compressor Combo Kit, 3400 RPM, 1.1 HP
The Bostitch CPACK270 is a Factory Reconditioned Dual Action Finish Tool and Compressor Combo Kit. The kit includes SB-1664FN 16 gauge, 2-1/2″ finish nailer, SB-IN1 combination brad nailer/finish stapler and CAP1516 1.5 HP (peak) oil-free contractor compressor. It also has 3/8″ x 25′ heavy-duty airline with MPT fittings, all required fittings & thread sealant tape with tire inflator chuck.
Click here to buy
More info: Bostitch CPACK270 Factory Reconditioned 3-Tool Nailer and Compressor Combo Kit, 1.5 HP
The DeWalt D55141FNBN is a Factory Reconditioned Heavy-Duty Finish Nailer/Brad Nailer/Compressor Combo Kit. The kit includes everything from the air compressor to the nailers, fasteners, air hose and fittings. Ideal for finish carpenters and woodworkers, the D55141FNBN can be used for custom installation of shelves, cabinet/furniture assembly and interior trim and more. Both nailers allow users to quickly adjust nail depth with an innovative vertical slide that has five indexed positions. The air exhaust is channeled away from the user with a tool-free 360 adjustable exhaust cap. For jam clearing, DeWalt designed a tool-free front-latch mechanism that is easy to use and stays tight over the life of the tool. The contact trip and nose are designed to provide better nail-placement visibility. A low-profile no-mar pad grips material when toe-nailing, yet alleviates indentations from the contact trip. The no-mar pad is designed to attach firmly to the contact trip but is easy to remove when necessary. For user convenience, both nailers feature a tool-free reversible belt hook for right- and left-handed users, while a rubber handgrip provides comfort and control. The heavy-duty 2 Gallon 150 PSI max trim compressor offers end users a lightweight, compact design and quiet operation, ideal for a 2-man crew.
Click here to buy
More info: DeWalt D55141FNBN Factory Reconditioned Heavy-Duty Finish Nailer/Brad Nailer/Compressor Combo Kit, 2200 RPM, 1.8 CFM
The DeWalt D55141FNBN is a Heavy-Duty Finish Nailer/Brad Nailer/Compressor Combo Kit. The compressor has 2.0 SCFM delivered @90 PSI pump, 2.0 gallon tank and 150 max PSI which enables more nails to be fired and provides quicker recovery. Ball valve drain allows for quick and thorough tank draining. It features durable oil free pump provides extended maintenance-free operation. Its low 10 Amp draw motor provides easy start-up and reduces breaker tripping. Roll cage and control panel provide protection to key compressor components. It has low 79 dBA operational noise level for a quieter work environment. The D51236K nailer uses 1/2 inch - 1-1/4 inch 18 gauge straight collated nails and has 100 nail capacity. Nailer features overmolded no-mar pad which increases visibility and reduces marring on material. It is lightweight (30 lbs), thin (10.5 inch) and compact design and is easy to carry and store. The D51256K nailer uses 1-1/4 inch - 2-1/2 inch, 16 gauge straight collated nails and has 160 nail capacity. Nailer tool free features 360 exhaust, depth ajustment thumbwheel and jam clearing.
Click here to buy
More info: DeWalt D55141FNBN Heavy-Duty Finish Nailer/Brad Nailer/Compressor Combo Kit, 2200 RPM, 0.6 HP
